Item
Mask
Preference
Next Hop
Interface
Displaying the IPv6 active route table
Select Network > IPv6 Routing from the navigation tree to enter the page.
Figure 268 IPv6 active route table
Table 93 Field description
Field
Destination IP Address
Prefix Length
Protocol
Preference
Description
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
Set a preference value for the static route. The smaller the number, the higher
the preference.
For example, specifying the same preference for multiple static routes to the
same destination enables load sharing on the routes, while specifying different
preferences enables route backup.
Enter the next hop IP address, in dotted decimal notation.
Select the outgoing interface.
You can select any available Layer 3 interface, for example, a virtual
interface, of the device. If you select NULL 0, the destination IP address is
unreachable.
Description
Destination IP address and prefix length of the IPv6 route
Protocol that discovered the IPv6 route
Preference value for the IPv6 route
The smaller the number, the higher the preference.
259