Configure Radius Server Settings - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203

Configure RADIUS Server Settings

For authentication, accounting, or both authentication and accounting using RADIUS, you
need to configure primary servers and optional secondary servers. These RADIUS server
settings can apply to all devices that are connected to the wireless access point.

To configure the RADIUS server settings:
1. Select Configuration > Security > Advanced > Radius Server Settings.
The Radius Server Settings screen displays.
2. Specify the settings as described in the following table:
Setting
Radius Server Settings
Primary
Authentication Server
Descriptions
IP Address Enter the IP address of the primary RADIUS server for
authentication.
Port Enter the number of the UDP port on the wireless access point
that is used to access the primary RADIUS server for
authentication. The default port number is 1812.
Shared Secret Enter the shared key that is used between the wireless access
point and the primary RADIUS server during authentication.
Wireless Configuration and Security
45