NETGEAR ProSAFE WN203 Reference Manual page 29

ProSAFE Single Band 802.11n Wireless Access Point WN203
3. Verify network connectivity by using a browser such as Microsoft Internet Explorer 8.0 or
later, or Mozilla Firefox 18.0 or later to browse the Internet, or check for file and printer
access on your network.
Note: If you have trouble connecting to the wireless access point, see
Chapter 7,
NETGEAR recommends that you complete the following tasks before you deploy the
wireless access point in your network:
• Configure wireless security and other wireless features. See
Configuration and
• Configure any additional features that you might need. See
Chapter 5, Advanced
After you have completed the configuration of the wireless access point, you can reconfigure
the computer that you used for this process back to its original TCP/IP settings.
Troubleshooting.
Security.
Configuration.
Installation and Basic Configuration
29
Chapter 3, Wireless
Chapter 4, Management, and