NETGEAR ProSAFE WN203 Reference Manual page 59

ProSAFE Single Band 802.11n Wireless Access Point WN203
Note: After you have restored the factory default settings on the wireless
access point:
* All custom configurations are lost.
* The login password is password.
* The default LAN IP address is 192.168.0.100.
* The DHCP client is disabled.
* The Access Point Name field is reset to the name printed on
the label of the unit.
For more information about the factory default settings, see
page 108.
Use the Web Management Interface to Restore Factory Default Settings
IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!

To restore the factory default settings using the web management interface:
1. Select Maintenance > Reset > Restore Defaults.
The Restore Defaults screen displays:
2. Select the Yes radio button.
By default, the No radio button is selected.
3. Click the Apply button.
The wireless access point resets to the factory default settings.
Factory Default Settings
Management
59
on