NETGEAR ProSAFE WN203 Reference Manual page 65

ProSAFE Single Band 802.11n Wireless Access Point WN203
The following table explains the fields of the Unknown AP List screen:
Setting
MAC Address
SSID
Privacy
Channel
Rate
Beacon Int.
# of Beacons
Last Seen
3. Click the Save button.
Export the list of unknown APs to a file. A window opens so you can browse to the
location where you want to save the file. The default file name is macList.txt.
4. (Optional) After you have reviewed the list, import the saved list into the Known AP List on
the Rogue AP screen (see

To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP > Known AP List.
The Known AP List screen displays:
2. (Optional) Click the Refresh button.
The wireless access point detects the access points and populates the Known AP List for
the configured wireless modes.
Description
The MAC address of the unknown AP.
The SSID that the unknown AP is using.
Indicates whether security is enabled (1 means enabled; 0 means
disabled).
The channel that the unknown AP is using.
The transmit data rate in Mbps of the unknown the AP.
The interval for each beacon transmission in ms.
The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
The time stamp that indicates the time when the most recent beacon was
detected.
Enable and Configure Rogue AP Detection
Management
65
on page 63).