Configure The Ip Settings - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203

Configure the IP Settings

WARNING:
If you enable the DHCP client, the IP address of the wireless
access point changes when you click the Apply button, causing
you to lose your connection to the wireless access point. You then
need to use the new IP address to reconnect to the wireless
access point.
Tip: If you enable the DHCP client on the wireless access point, you can
discover the new IP address of the wireless access point by accessing
the DHCP server on your LAN, or by using a network IP address scanner
application.

To configure the IP settings:
1. Select Configuration > IP > IP Settings.
The IP Settings screen displays:
Installation and Basic Configuration
22