NETGEAR ProSAFE WN203 Reference Manual page 110

ProSAFE Single Band 802.11n Wireless Access Point WN203
Table 6. Default configuration settings (continued)
Feature
DHCP server gateway IP address
DHCP server IP address lease for clients
Radio and wireless settings
Operating mode
Wireless access point name
Country and region
Wireless communication
Wireless mode
Wireless network name (SSID)
Broadcast wireless network name (SSID)
Radio frequency channels
MCS index/data rate (transmission speed)
Channel width
Guard interval
Output power
Wireless on/off (radio scheduling)
RTS threshold
Fragmentation length
Beacon interval
Aggregation length
A-MPDU
RIFS transmission
DTIM interval
Preamble type
Description
192.168.0.1
1 (one day)
Access point, infrastructure mode
netgearxxxxxx, where xxxxxx are the last 6 digits
of the wireless access point MAC address
Varies by region
2.4 GHz radio enabled
11ng
NETGEAR_11ng
Enabled
11ng: Auto
Best
Note:
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower
actual data throughput rate.
11ng: 20 MHz
Auto
Full
Disabled
2347
2346
100
65535
Enabled
Disabled
3
Auto
Supplemental Information
110
Maximum wireless signal rate derived