View System Information - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203

View System Information

The System screen provides a summary of the current wireless access point configuration
settings, including current IP settings and current wireless settings. This information is read
only, so any changes need to be made on other screens.

To view the System screen:
Select Monitoring > System.
The following table explains the fields of the System screen:
Setting
Access Point Information
Access Point Name
Ethernet MAC Address
Wireless MAC Address
for 2.4GHz
Description
The NetBIOS name. For information about how to change the default name, see
Configure Basic General System Settings and Time Settings
The MAC address of the wireless access point's Ethernet port.
The MAC address of the wireless access point's 2.4 GHz radio.
Monitoring
92
on page 20.