NETGEAR ProSAFE WN203 Reference Manual page 122

ProSAFE Single Band 802.11n Wireless Access Point WN203
|-exit
|-firmware-upgrade
|
|-firmware-upgrade-tftp
|
|-reset-ap
|-restore-configuration
|-restore-default-password
|-restore-factory-default
|-save-and-activate
|-show>
| |-country
| |-dhcp
| |-ethernet>
| | |-statistics
| |-hotspot
| |-ip>
| | |-config
| | |-status
| |-log
| |-name
| |
| |-radio>
| | |-2.4
| | |-2.4>
| | | |-associated-client
| | | |-macacl
| | | |
| | | |-rogue-ap-detection>
| | | | |-known>
| | | | | |-scanned
| | | | | |-config
| | | | |
| | | | |-unknown
| | | |
| | | |-station-list
| | | |-statistics
| | | |-wds>
| | | | |-1
| | | | |-2
| | | | |-3
| | | | |-4
| | | |
| | | |-wlan>
| | | | |-1
| | | | |-2
| | | | |-3
| | | | |-4
| | | | |-5
| | | | |-6
--Logout from CLI
--Upload new system firmware file from
FTP server
--Upload new system firmware file from
TFTP server
--Reset the ap
--Restore system configuration
--Restore default system password
--Restore default system configurations
–-Save and activate configuration
--Show system settings
--Show Country
--Show DHCP settings
--Ethernet interface
--Show ethernet statistics
--Show hotspot settings
--IP settings
--Show IP configurations
--Show IP status
--Show system logs
--Show ap name
--Show 2.4GHz wlan interface settings
--2.4GHz wlan interface settings
--Associated client(s)
--Wireless access control (ACL) mac
address list
--Rogue ap detection
--Known
--Scanned list
--Config list
--Unknown list
--Station list
--Interface statistics
--Wireless bridge settings
--1st security profile
--2nd security profile
--3rd security profile
--4th security profile
--VAP settings
--1st security profile
--2nd security profile
--3rd security profile
--4th security profile
--5th security profile
--6th security profile
Command-Line Reference
122