Appendix B Command-Line Reference - NETGEAR ProSAFE WN203 Reference Manual

Command-Line Reference
B.
The wireless access point can be configured through either the command-line interface (CLI), a
web browser, or a MIB browser.
The CLI allows viewing and modification of the configuration from a terminal or computer through
a Telnet or SSH connection.
Keyword
-------------------------------------------------------------------------------------------
|-backup-configuration
|
|-config>
| |-country
| |
| |-dhcp>
| | |-dns1
| | |-dns2
| | |- gateway
| | |-lease
| | |-start
| | |-status
| | |-stop
| | |-subnet
| | |-vlan
| | |-wins1
| | |-wins2
| |
| |-hotspot>
| | |-redirect
| | |-status
| |
| |-ip>
| | |-address
| | |-dhcp-client
| | |-dns
| | |-dns2
| | |-gateway
| | |-subnet
| |
Description
--Backup configuration
--Configuration setting
--Country/region
--DHCP server setting
--DNS1 server
--DNS2 server
--Default gateway
--Lease time
--Start IP address
--Status
--Stop IP address
--Subnet mask
--VLAN id
--WINS1 server
--WINS2 server
--Hotspot setting
--Hotspot redirection URL
--Hotspot status
--Set host IP
--Host IP address
--Enable dhcp client
--IP address of Primary DNS server
--IP address of Secondary DNS server
--IP address of default gateway
--IP address of Subnet mask
112
B