NETGEAR ProSAFE WN203 Reference Manual page 113

ProSAFE Single Band 802.11n Wireless Access Point WN203
| |-name
| |
| |-no>
| | |-dhcp>
| | | |-dns1
| | | |-dns2
| | | |-wins1
| | | |-wins2
| | |-radius>
| | | |-primary>
| | | | |-auth port
| | | | |-auth secret
| | | | |-auth server
| | | | |-acct port
| | | | |-acct secret
| | | | |-acct server
| | | |-secondary>
| | | | |-auth port
| | | | |-auth secret
| | | | |-auth server
| | | | |-acct port
| | | | |-acct secret
| | | | |-acct server
| |-radio>
| | |-2.4
| | |-2.4>
| | | |-80211d
| | | |-aggregation-length
| | | |-ampdu
| | | |-beacon-interval
| | | |-channel
| | | |
| | | |-channel auto
| | | |-channel-width
| | | |-client-isolation
| | | |-data-rate>
| | | | |-best
| | | | |-mcs
| | | | |-rate
| | | |-dtim
| | | |-fragmentation-length
| | | |-guard-interval
| | | |
| | | |-macacl add
| | | |-macacl del
| | | |-macacl del all
| | | |
| | | |-max-client
| | | |-power
--Access point name
--Reset
--DHCP server settings
--DNS1 server
--DNS2 server
--WINS1 server
--WINS1 server
--RADIUS server setting
--Primary RADIUS server
--Authentication port
--Authentication shared secret
--Authentication server IP
--Accounting port
--Accounting shared secret
--Accounting server IP
--Secondary RADIUS server
--Authentication port
--Authentication shared secret
--Authentication server IP
--Accounting port
--Accounting shared secret
--Accounting server IP
--Wireless LAN interface setting
--2.4 GHz wireless LAN status
--2.4 GHz wireless LAN interface setting
--802.11D
--Aggregated packet size
--Aggregated MAC Protocol Data Unit
--Wireless beacon period in TU(1024 us)
--Wireless channel (depends on country
and wireless mode)
--Set wireless channel to auto mode
--Wireless channel width
--Client isolation status
--Wireless transmission date rate
--Best date rate
--Date rate (MCS Index)
--Date rate (in Mbps)
--Wireless DTIM period in beacon interval
--Wireless fragmentation threshold
--Guard interval (from interference from
other transmissions)
--Add wireless access control (ACL)
--Delete wireless access control (ACL)
--Delete wireless access control (ACL)
database
--Maximum client
--Output power
Command-Line Reference
113