You Cannot Configure The Wireless Access Point From A Browser - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203
• The wireless access point's default values might not work with your network. Check the
wireless access point's default configuration against the configuration of other devices in
your network.
• Make sure that the SSID, network authentication, and data encryption settings of the
computer with the wireless adapter are the same as those of the wireless access point.
• Ping the IP address of the wireless access point to verify that a wireless connection exists
between the computer with the wireless adapter and the wireless access point. If the ping
fails, check the network configuration for the wireless access point (see
Settings on page 22).
• Ping the default gateway to verify that a path exists from the computer with the wireless
adapter to the default gateway. If the ping fails, check the network configuration or call the
Internet service provider (ISP).
You Cannot Configure the Wireless Access Point from
a Browser

Check these items:
• The wireless access point is correctly installed, it is powered on, and LAN connections
are okay. Check that the Active LED and LAN LED are lit to verify that the Ethernet
connection is okay.
• If your computer uses a fixed (static) IP address, ensure that it is using an IP address in
the range of the wireless access point. The wireless access point's default IP address is
192.168.0.100, its subnet mask is 255.255.255.0, and the DHCP client is disabled. Make
sure that your network configuration settings are correct.
• If you are using the NetBIOS name of the wireless access point to connect, ensure that
your computer and the wireless access point are on the same network segment or that
your network includes a WINS server.
• If your computer is set to obtain an IP address automatically (DHCP client), restart it.
• Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.
• Try quitting the browser, clearing the cache, deleting the cookies, and launching the
browser again.
• Make sure that you are using the correct login information. The factory default login name
is admin, and the password is password. Make sure that Caps Lock is off when entering
this information.

If the wireless access point does not save changes you have made in the web
management interface, check the following:
• When entering configuration settings, be sure to click the Apply button before moving to
another screen or tab, or your changes are lost.
• Click the Refresh or Reload button in the web browser. The changes might have
occurred, but the web browser might be caching the old configuration.
Troubleshooting
102
Configure the IP