Making Adjustments - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Interpreting the Test Print
The Color Balance test print contains numbered images that indicate possible adjustments
that can be made. You can choose to make an adjustment to the Black Density, the Color
Balance, or the Color Density.
The Black Density Images, numbered -3K...0,...+3K, show a lightness/darkness range
I
using black only.
The Color Balance Images, numbered 0,1,2,...12, show variations of three-color gray.
I
Each of these circles contains gray with tints of other colors.
The Color Density Images, numbered -3CMY...0,...+3CMY, show a lightness/darkness
I
range using three colors (cyan, magenta, yellow).
Color and Density Adjustment Test Page Graphics

Making Adjustments

Use the following procedures to make adjustments to the color density and balance:
Black Density Adjustment
1. Identify the square where the bar and background patterns blend together. If this
square is the Current (0) square, no adjustment is needed. Continue to Color Balance
Adjustment.
Advanced Features and Troubleshooting Manual
Adjusting Color Density and Balance
C/
Front Panel Keys used to make Color and
Density adjustments.
73