Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 105

Troubleshooting
Printer Management Status Messages (cont'd.)
Un-LED Error
[U18-Yellow LED Bar Missing]
[U19-Magenta LED Bar Missing]
[U20-Cyan LED Bar Missing]
[U21-Black LED Bar Missing]
Un-Toner Missing
[U22-Yellow Toner Missing]
[U23-Magenta Toner Missing]
[U24-Cyan Toner Missing]
[U25-Black Toner Missing]
Reseat Toner
Un-Drum Error
[U26-Yellow Drum Error]
[U27-Magenta Drum Error]
[U28-Cyan Drum Error]
[U29-Black Drum Error]
Wn-Toner Low
[W1-Yellow Toner Low]
[W2-Magenta Toner Low]
[W3-Cyan Toner Low]
[W4-Black Toner Low]
W5-Transfer Belt Near End Of
Life
W6-Fuser Near End Of Life
Wn-Drum
[W7-Yellow Drum]
[W8-Magenta Drum]
[W9-Cyan Drum]
[W10-Black Drum]
Near End Of Life
W11-Tray 1 Paper Low
W12-Tray 2 Paper Low
92
Fault The LED bar is not recognized by the printer. Turn
off the printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the support
links at:
www.xerox.com/officeprinting/infoSMART.
Fault The toner is either missing or must be reseated to
be recognized by the printer. Turn off the printer,
wait 15 seconds, then turn on the printer. If the
problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault The imaging drum is either missing or must be
reseated to be recognized by the printer. Turn off
the printer, make sure the imaging drum is
properly installed, and turn on the printer. If the
problem persists, install a new imaging drum. For
further assistance, visit the support links at:
www.xerox.com/officeprinting/infoSMART.
Attention The toner is low and should be replaced soon.
Printing can continue until the printer determines
that the toner is at its end of life; however, some
degradation of image quality may occur. The
message will remain until interrupted by other
messages or until the toner is replaced
Attention The transfer belt is near its end of life. Printing can
continue until the printer determines that the
transfer belt is at its end of life; however, some
degradation of image quality may occur. The
message will remain until interrupted by other
messages or until the transfer belt is replaced.
Attention The fuser is near its end of life. Printing can
continue until the printer determines that the
fuser is at its end of life, however some
degradation of image quality may occur. The
message will remain until interrupted by other
messages or until the fuser is replaced.
Attention The imaging drum is near its end of life. Printing
can continue until the printer determines that the
imaging drum is at its end of life, however some
degradation of image quality may occur. The
message will remain until interrupted by other
messages or until the imaging drum is replaced.
Attention The printer has detected that the paper level in
Tray 1 is low. Printing can continue until the tray
runs out of paper. Reload the tray as soon as
possible to avoid printing interruptions.
Attention The printer has detected that the paper level in
Tray 2 is low. Printing can continue until the tray
runs out of paper. Reload the tray as soon as
possible to avoid printing interruptions.
Phaser 2135 Color Printer