Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 57

Managing Printer Usage
Ethernet Menu Items (cont'd.)
Menu Items Description
Default Gateway Sets the four byte Default Gateway address. (This menu item only appears if
IP Address Resolution is set to static.)
Values:
Note
LPR Enable Sets the Ethernet LPR protocol.
Values:
LPR Banner Sets the LPR banner sheet.
Values:
LPR PDL Sets the default page description language interpreter for the Ethernet LPR
protocol.
Values:
Note
AppSocket Enable Sets the Ethernet AppSocket interface.
Values:
44
xxx.xxx.xxx.xxx
where xxx = 000 to 255
Once the front panel shows Default Gateway on the top line,
use the Value Up or
the desired value at the cursor location. To move the cursor, use
the Item Up or Item Down
change characters within the address rather than having to re-enter
the entire address. The printer must be turned off and on before
the changes will take effect.
For more information, refer to the Setting Network Addresses
section on page 38.
On (default)
Off
On
Off (default)
Auto (default)
PCL
PostScript
To submit TIFF and PDF files to the printer, this value must be
Auto.
On (default)
Off
Value Down keys (labeled 3 and 7) to scroll to
keys (labeled 2 and 6). Thus, you can
Phaser 2135 Color Printer