Memory - Xerox phaser 2135 Advanced Features And Troubleshooting Manual
Color printer
Hide thumbs
Also See for phaser 2135:
- User manual (98 pages) ,
- Install manual (30 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Memory
Caution
DISCHARGE STATIC ELECTRICITY: The controller board and internal printer
options (Hard Drive and Memory) are sensitive to static electricity. Before
installing or removing an internal option, discharge static electricity from your
body by touching something metal, such as the metal back plate on any device
plugged into a grounded power source. If you walk around before finishing the
installation, again discharge any static electricity.
Installation
Follow this procedure to install additional memory.
1.
Turn off the printer and disconnect cables and power cord.
2.
Remove the screws that secure the controller board and slide the controller board out
of the printer. Place it on a stable horizontal surface.
3.
Pull apart the clips on either side of an available memory slot.
Advanced Features and Troubleshooting Manual
Installation Precautions
2135-20
101
Advertisement
Table of Contents
Troubleshooting
