Ethernet Menu - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Color printer
Hide thumbs Also See for phaser 2135:
Table of Contents

Advertisement

Ethernet Menu

Sets options for the Ethernet port connection.
Ethernet Menu Items
Menu Items
Description
Print Connect
Prints a page that provides instructions for connecting the printer to a
Setup Page
computer or network.
Print Configuration
Prints the Configuration Page which shows the printer's current information
Page
and menu settings. It lists the printer name, software revision level,
communication parameter settings, options installed, current option settings
in the front panel's menu system, and print counts.
IP Address
Sets the method used to assign the IP address, including Subnet mask and
Resolution
default gateway.
Values:
IP Address
Sets the four byte IP address. (This menu item only appears if IP Address
Resolution is set to static.)
Values:
Note
Subnet Mask
Sets the four byte Subnet Mask address. (This menu item only appears if IP
Address Resolution is set to static.)
Values:
Note
Advanced Features and Troubleshooting Manual
Static
BOOTP
DHCP (default)
xxx.xxx.xxx.xxx
where xxx = 000 to 255
Once the front panel shows IP Address on the top line, use the
Value Up
Value Down
or
desired value at the cursor location. To move the cursor, use the
Item Up
Item Down
or
characters within the address rather than having to re-enter the
entire address. The printer must be turned off and on before the
changes will take effect.
For more information, refer to the Setting Network Addresses
section on page 38.
xxx.xxx.xxx.xxx
where xxx = 000 to 255
Once the front panel shows
use the
or
Value Up
to the desired value at the cursor location. To move the
cursor, use the
Item Up
Thus, you can change characters within the address rather
than having to re-enter the entire address. The printer must
be turned off and on before the changes will take effect.
For more information, refer to the Setting Network
Addresses section on page 38.
Managing Printer Usage
key (labeled 3 and 7) to scroll to the
key (labeled 2 and 6). Thus, you can change
Subnet Mask
key (labeled 3 and 7) to scroll
Value Down
or
key (labeled 2 and 6).
Item Down
on the top line,
43

Advertisement

Table of Contents
loading

Table of Contents