Mirror Image - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Automatic Image Correction
Optimizes printing of photographs or bitmapped images. It enhances RGB images if the
exposure level, color balance, sharpness, brightness, or contrast settings in the original
image have not been optimized. If an image is already optimized (i.e., properly balanced,
high resolution image, etc.), it will not be affected by this setting. The default mode is Off.
Smooth Low-Resolution Images
Enhances low-resolution graphics. Ideal for images from the World Wide Web.
Image Quality (Print Mode)
The modes are:
Standard
I
Sets the resolution to 600 x 600 dpi.
Enhanced (default)
I
Sets the resolution to 1200 x 600 dpi.

Mirror Image

Flips the image across the vertical axis 180 degrees, thereby reversing the image and all
associated text.
Multiple Pages Per Side (N-Up Pages)
By default, the printer prints one page image on the sheet of paper. You can select two,
four, six, nine or sixteen page images per side of paper. The printer shrinks the page
images as needed and arranges them on the paper most appropriately for the paper size
and orientation.
1
1
1 up 2 up
You can also choose to print black borders (draw outlines) around each page. The default
is to not print borders.
Advanced Features and Troubleshooting Manual
1 2
1 2
2
4 5
3 4
4 up 6 up
1 2 3
3
4 5 6
6
7 8 9
9 up 16 up
Printer Drivers
25