Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 52

Primary Server
I
NDS Context
I
PServer Name
I
NDS Tree
I
To set an address:
1. Press the
Menu Up
The following sample front panel screen shows the Ethernet Menu.
2. Press the or
Item Up
want to set.
The following sample front panel screen shows the IP Address menu item of the
Ethernet Menu.
3. Press the or
Value Up
(if no address has been assigned). The underline indicates the position of the cursor,
which starts at the first digit.
4. To change the value of the first digit, press the Value Up or
or 7) until you have set the correct value for that digit.
5. Press the Item Up key (labeled 2) to move the cursor to the next digit.
6. To change the value of the underlined digit, press the Value Up or
(labeled 3 or 7) until you have set the correct value for that digit.
7. Continue to use the Item Up key (labeled 2) to move to the next digit to the right and
use the Value Up or
underlined digit.
8. When you have completed the address, press the Enter key (labeled 4), then press the
On Line key (labeled 0).
9. For the new value to take effect, you need to power the printer off and on again.
Advanced Features and Troubleshooting Manual
or key (labeled 1 or 5) to scroll to the desired menu.
Menu Down
Menus
Ethernet Menu
key (labeled 2 or 6) to scroll to the address that you
Item Down
Ethernet Menu
IP Address
key (labeled 3 or 7) to see the current address or zeros
Value Down
IP Address
000.000.000.000
IP Address
200.000.000.000
key (labeled 3 or 7) to change the value of the
Value Down
Managing Printer Usage
key (labeled 3
Value Down
key
Value Down
39