Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 65

Managing Printer Usage
Printer Setup Menu Items (cont'd.)
Menu Items Description
Paper Loading Specifies how long the printer should wait and prompt the user on the front
Timeout panel when a requested size/type/tray combination does not exist on the
printer. If media is not loaded as requested, the printer will timeout and
automatically print the job using paper from another tray. Once the timeout
expires, the printer attempts to match the size and type as closely as possible.
Finally, it will use whatever tray is available, starting with Tray 1.
Values:
Color Mode Sets the color mode.
Values:
For more information on color modes, see page 24.
Print Mode Sets the print quality.
Values:
2-Sided Printing Enables/disables 2-sided printing for PostScript and PCL jobs. (This menu
item only appears if the printer has the Duplex Module installed.)
Values:
Note
Job Offset Enables/disables offsetting of jobs in the top output tray.
Values:
Note
52
Immediate
30 seconds
1 minute
2 minutes
3 minutes (default)
5 minutes
2 minutes
10 minutes
Never
Automatic (default)
GrayScale
None
Fax Friendly
ICC Perceptual
ICC Saturation
ICC Colorimetric
CMYK Simulation
Standard (600 x 600 dpi)
Enhanced (1200 x 600 dpi) (default)
Off (default)
Long Edge (bind on long edge)
Short Edge (bind on short edge)
For more information on duplex printing and choosing Long Edge
or Short Edge, see page 20.
Off
On (default)
This setting does not affect the side output tray.
Phaser 2135 Color Printer