Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 48

Selecting Paper Size and Type
Whenever you load paper in the Multi-sheet Bypass Feeder, the printer prompts you for
the paper type and size.
Whenever you load paper in a tray, the printer prompts you only for the paper type. The
trays have paper size sensing, and are therefore automatically configured for paper size
when media is properly loaded.
To specify the paper type in the newly-loaded tray:
1. When prompted on the front panel, press the
7) to scroll to the correct paper type; the choices are shown in the following table.
2. Press the key (labeled 4).
Enter
Tray 1 Types
Tray N Type
(where N is the tray
number — Tray 2,
3, 4, or 5, if
installed)
To specify the paper type and size in the Multi-sheet Bypass Feeder (MBF):
1.
When prompted on the front panel, press the
7) to scroll to the correct paper type; the choices are shown in the following table.
2. Press the key (labeled 4).
Enter
3. Press the
Value Up
the choices are shown in the following table.
4. Press the key (labeled 4).
Enter
MBF Type
Advanced Features and Troubleshooting Manual
Plain Paper
Heavy Paper
Phaser 2135 Transparency
Plain Paper
Heavy Paper
or key (labeled 3 or 7) to scroll to the correct paper size;
Value Down
Plain Paper
Heavy Paper
Phaser 2135 Transparency
Glossy Paper
Thick Card Stock
Managing Printer Usage
or key (labeled 3 or
Value Up Value Down
Glossy Paper
Thin Card Stock
Light Paper
Thin Card Stock
Light Paper
or key (labeled 3 or
Value Up Value Down
Thin Card Stock
Labels
Envelopes
Business Cards
Light Paper
35