Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 108

Printer Operation Problems (cont'd.)
A printed page does
I
not look like it
should.
I
I
I
I
Print a PCL Font List, or PostScript Font List if the job is PostScript.
The requested font
for the job does not
print. I
I
I
2-sided printing
I
I
I
I
I
I
Advanced Features and Troubleshooting Manual
Make sure that the software application you are using to create
your print job is configured properly. Refer to your software
documentation.
Make sure you have selected the appropriate media type in the
printer's front panel. Print the Paper Tips Page in the Support
menu for a list of paper type and size selections.
Make sure the size of paper loaded in the paper tray matches
the paper size selected in the computer's driver.
Print the Diagnostic Pages for tips on troubleshooting print
quality problems.
Make sure the recommended driver is being used.
Verify that the options you have selected within the
I
driver are installed on the destination printer as specified
in the Configuration Page.
Try using the default settings of the driver.
I
If fonts print on the Font List, your print job may need
correcting.
If fonts do not print on the Font List, reload the fonts and print
another PCL or PostScript Font List.
For information on font substitution, refer to Font Substitution
Table on page 24.
Make sure the Auto Duplex Unit is installed.
Make sure the 2-sided printing option is selected in the printer
driver.
Make sure the paper type selected in the printer driver is
supported for 2-sided printing.
Automatic 2-sided printing is supported from Trays 1, 2, 3, 4
and 5.
Automatic 2-sided printing is not supported from the
Multi-Sheet Bypass Feeder (MBF).
2-sided printing is not available with either the 1st page
different or separator page options.
Troubleshooting
95