Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 115

Installation Precautions
4. Insert the memory into the slot.
Note
256- Mbyte DIMMs must be used alone or as a pair. They cannot be used in
combination with any other size of memory.
5. Secure the memory to the controller board with the clips.
6.
Align the controller board with the printer's guide channel and slide the board all the
way into the printer until it stops. Then replace the screws to secure the controller
board.
7. Reconnect the power cord and all cables and turn on the printer.
8. Print a Configuration Sheet (as described on page 37) and confirm that the total
memory is correct. If any problems occur, reinstall the memory. If problems persist,
check the support links at www.xerox.com/officeprinting
102
2135-26
for assistance.
/infoSMART
Phaser Color Printer 2135