Wireless Lan Advanced Screen - ZyXEL Communications NBG6515 User Manual

Ac750 dual-band wireless gigabit router
Hide thumbs Also See for NBG6515:
Table of Contents

Advertisement

Table 42 Network > Wireless LAN 2.4G/5G > MAC Filter (continued)
LABEL
MAC Address
Apply
Reset

11.7 Wireless LAN Advanced Screen

Use this screen to allow wireless advanced features, such as intra-BSS networking and set the
RTS/CTS Threshold
Click Network > Wireless LAN 2.4G or Wireless LAN 5G > Advanced. The screen appears as
shown.
Figure 70 Network > Wireless LAN 2.4G/5G > Advanced
The following table describes the labels in this screen.
Table 43 Network > Wireless LAN 2.4G/5G > Advanced
LABEL
Wireless Advanced Setup
RTS/CTS
Threshold
Fragmentation
Threshold
Enable Intra-
BSS Traffic
Blocking
Output Power
HT (High Throughput) Physical Mode - Use the fields below to configure the 802.11 wireless environment of
your NBG.
Chapter 11 Wireless LAN
DESCRIPTION
This is the MAC address of the wireless station that are allowed or denied access to the
NBG.
Click Apply to save your changes back to the NBG.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent. Enter an even number.
A Basic Service Set (BSS) exists when all communications between wireless clients or
between a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless client A and B can access the wired network and communicate with each other.
When Intra-BSS is disabled, wireless client A and B can still access the wired network but
cannot communicate with each other.
Set the output power of the NBG in this field. If there is a high density of APs in an area,
decrease the output power of the NBG to reduce interference with other APs. Select one of
the following 100%, 90%, 75%, 50%, 25%, 10% or Minimum. See the product
specifications for more information on your NBG's output power.
NBG6515 User's Guide
90

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents