Configuration Backup/Restore Screen - ZyXEL Communications NBG6503 User Manual

Figure 116 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 68 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Check for
Latest
Firmware Now
Note: Do not turn off the NBG while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
NBG again.
The NBG automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 117 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.

22.7 Configuration Backup/Restore Screen

Backup configuration allows you to back up (save) the NBG's current configuration to a file on your
computer. Once your NBG is configured and functioning properly, it is highly recommended that you
Chapter 22 Maintenance
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Click this to check for the latest updated firmware.
NBG6503 User's Guide
155