Rule Configuration: User Defined Service Rule Configuration - ZyXEL Communications NBG6503 User Manual

Chapter 19 Bandwidth Management

19.5.2 Rule Configuration: User Defined Service Rule Configuration

If you want to edit a bandwidth management rule for other applications or services, click the Edit
icon in the User-defined Service table of the Advanced screen. The following screen displays.
Figure 98 Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen
Table 61 Bandwidth Management Rule Configuration: User-defined Service
LABEL
BW Budget
Destination
Address
Destination
Subnet
Netmask
Destination
Port
Source Address
Source Subnet
Netmask
Source Port
Protocol
Apply
Cancel
See Appendix D on page 223
142
DESCRIPTION
Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or
minimum bandwidth allowed for the rule in kilobits per second.
Enter the IP address of the destination computer.
The Router applies bandwidth management to the service or application that is entering this
computer.
Enter the subnet netmask of the destination of the traffic for which the bandwidth
management rule applies.
This is the port number of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Enter the IP address of the computer that initializes traffic for the application or service.
The Router applies bandwidth management to traffic initiating from this computer.
Enter the subnet netmask of the computer initiating the traffic for which the bandwidth
management rule applies.
This is the port number of the source that define the traffic type, for example TCP port 80
defines web traffic.
Select the protocol (TCP, UDP, User defined) for which the bandwidth management rule
applies.
If you select User-defined, enter the protocol for which the bandwidth management rule
applies. For example, ICMP for ping traffic.
Click Apply to save your customized settings.
Click Cancel to exit this screen without saving.
for commonly used services and port numbers.
NBG6503 User's Guide