Rule Configuration: User Defined Service Rule Configuration - ZyXEL Communications NBG6616 User Manual

Figure 97 Bandwidth Management Rule Configuration: Application List
The following table describes the labels in this screen.
Table 65 Bandwidth Management Rule Configuration: Application List
LABEL
#
Enable
Direction
Bandwidth
Destination Port
Source Port
Protocol
Apply
Cancel

21.5.2 Rule Configuration: User Defined Service Rule Configuration

If you want to edit a bandwidth management rule for other applications or services, click the Edit
icon in the User-defined Service table of the Advanced screen. The following screen displays.
Chapter 21 Bandwidth Management
DESCRIPTION
This is the number of an individual bandwidth management rule.
Select an interface's check box to enable bandwidth management on that interface.
These read-only labels represent the physical interfaces. Bandwidth management applies
to all traffic flowing out of the router through the interface, regardless of the traffic's
source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the NBG6616
and be managed by bandwidth management.
Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or
minimum bandwidth allowed for the rule in kilobits per second.
This is the port number of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
See Appendix C on page 224
This is the port number of the source that define the traffic type, for example TCP port 80
defines web traffic.
See Appendix C on page 224
This is the protocol (TCP, UDP or user-defined) used for the service.
Click Apply to save your customized settings.
Click Cancel to exit this screen without saving.
NBG6616 User's Guide
149
for some common services and port numbers.
for some common services and port numbers.