The Port Forwarding Edit Screen - ZyXEL Communications P-2601HN(L)-F1 Series User Manual

Chapter 11 Network Address Translation (NAT)
Table 35 Network Setting > NAT > Port Forwarding (continued)
LABEL
Translation
Start Port
Translation End
Port
Server IP
Address
Protocol
Modify
Apply
Cancel

11.2.2 The Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Click Add new rule in
the Port Forwarding screen or the Edit icon next to an existing rule to open the
following screen.
Figure 67 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 36 Port Forwarding: Add/Edit
LABEL
Enable
Service Name
152
DESCRIPTION
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
This shows the IP protocol supported by this virtual server, whether it is
TCP, UDP, or TCP/UDP.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note
that subsequent address mapping rules move up by one when you take
this action.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Clear the check box to disable the rule. Select the check box to enable it.
This field is available only when you are editing the port forwarding rule.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-
2 and so on).
P-2601HN(L)-F1 Series User's Guide