Inputing Translations; Resetting The Media Server; Adding Media Gateways - Avaya S8710 Installing And Configuring

3 Translating the IPSIs

Inputing translations

Inputing translations
Contact the installation personnel responsible for translation input to download the translations.
1
Type
If the translations are not ready, you may continue with the process, entering minimal translations to
verify connectivity to the port networks.

Resetting the media server

1
Type

Adding media gateways

1
Type
Gateways or MCC1 Media Gateway controlled by one TN2312BP IPSI circuit pack.
2
Fill in the location and carrier type for media gateways 2(B), 3(C), 4(D), and 5(E).
add cabinet 1
CABINET DESCRIPTION
Rack:
CARRIER DESCRIPTION
Carrier
E
D
C
B
A
44
save translations and press Enter to save the translations to the hard drive.
NOTE:
Do not reset the media server if no translations were input or if they were not entered in
bulk.
reset system 4 and press Enter to have the software read the copied translations.
NOTE:
Do this procedure only if the translations were not input earlier.
NOTE:
A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and TDM-
connected or 1 MCC1 Media Gateway.
add cabinet number (1 through 64) and press Enter for each stack of G650 Media
Cabinet: 9
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Room:
Carrier Type
not-used
not-used
not-used
G650-port
G650-port
Installing and Configuring the Avaya S8700 or S8710 Media Server
CABINET
Floor: Building:
Number
PN 09
PN 09
PN 09
PN 09
PN 09
Page 1 of 1
June 2004