Services Access Port - Avaya S8400 Installing And Configuring

Chapter 1: Introduction

Services access port

The S8400 Media Server has one port for Services access. This port is off the Maintenance
Processor. Use this port to access the MPC and the media server on the S8400AP circuit pack
by way of the Services laptop computer.
Table 5: Services access on the MPC
receives Service requests on two TCP ports, 10022 (SSH access) and 10443 (Secure Web
access).
Note:
With Release 4.0 or later of Communication Manager, Telnet is disabled, so you
Note:
must use SSH to access media servers after Communication Manager software
Release 4.0 or later is installed.
Table 5: Services access on the MPC
Access
method
Services laptop
16
Installing and Configuring the Avaya S8400 Media Server
on page 16 lists the Services access protocols. The MPC
Service IP address
requested
SSH 192.11.13.6
HTTPS 192.11.13.6
SSH 192.11.13.6
HTTPS 192.11.13.6
Telnet 192.11.13.6
Telnet 192.11.13.6
TCP Service granted
port
10022 SSH access to the MPC
10443 Secure Web access to the MPC
22 Secure Shell access to the
media server
443 Secure Web access to the
media server
23 Access to the media server
5023 Access to the SAT on the media
server
1 of 2
February 2007