Switching The Dialing Mode; Between Pulse And Tone - Comdial Imression 2022S Reference Manual

Using The Other Telephone Features

7.17 Switching The Dialing Mode

Between Pulse And Tone

If the telephone service in your locality is pulse (rotary dialing), the
installer arranges your telephone to dial in this manner. If you need to
send tones during a dialing sequence (for example, to send
bank-by-telephone tones), you can convert to tone dialing mode while
dialing. The system will switch back to pulse dialing when you end your
call.
You can store a # as part of a speed dial number to cause an automatic
switch from pulse to tone where needed in a number sequence.
• To convert to tone dialing at any time during dialing or while
on an active call,
1. Press #.
7 – 16 LCD Speakerphone Reference Manual
GCA70–226