Using The Other
I elepnone
t-earures
Switching The Dialing
Mode Between Pulse And Tone
If your local telephone service is pulse (rotary dialing), your
telephone is arranged to dial in this manner (when programmed
to do so by the installer). If you need to send tones during a dialing
sequence (e.g.; to send bank-by-phone tones, etc), you can con-
vert to tone while dialing. The system will switch back to pulse
dialing when you end your call. You can store a # as part of an
automatic dialing number to effect pulse-to-tone switching where
needed.
To convert to tone dialing at any time during dialing or while
on an active call,
l
press #.
41