Using The Other Telephone Features; Using The Recall/Flash Feature; Making A Paging Announcement - Comdial DXP User Manual

Proprietary single line telephone station

Hide thumbs Also See for DXP:

Table of Contents

GCA70–251

Using The Other

Telephone Features

7.1

Your host system provides certain features that you can access from your

telephone. Your system will probably be configured so that pressing TAP

results in a flash signal to allow access, through dialed codes, to these

features.

If your system has been configured for flash,

1. Press TAP to generate a timed flash signal while on line.

If your system has been configured for recall,

1. Press TAP while on line to disconnect you from the current

call and return dial tone to your station.

7.2

To send a paging announcement,

1. Lift handset and listen for intercom dial tone.

2. Dial 70–77 for zones 1–8 (in the default mode, zone 1—code

70—provides an all-call function).

3. Make announcement.

4. Remain on line if awaiting a reply (known as a meet-me page),

—OR—

hang up handset.

Using The Other Telephone Features

Single Line Station User's Guide 7 – 1

Table of Contents

Dxp plus Fx series