Table of Contents
Advertisement
To store a number while you are on a call (if available), perform the
following steps.
1. Press the programmed SAVE NUMBER REDIAL button twice
(the display prompts you to dial a number).
2. Dial the number that you wish to save (the system immediately
saves the number for later redial; it does not dial it over the line
you are on now).
To redial the saved number, perform the following steps.
1. Press a line button to select a line.
2. Press the programmed SAVE NUMBER REDIAL button (the
system automatically dials the number that you saved earlier).
3.5 Camping On - Busy Station,
Automatic Callback
If you call another station and receive a busy signal or a Do Not
Disturb tone, you can press a button that causes the system to ring
your endpoint when the station is available. This is called camping
on at a station. Please note that you can camp on to only one station
at a time.
To camp on at any busy station,
select CAMP On. Your endpoint
immediately hangs up. When the
station becomes available, your
endpoint rings with five short tone
bursts.
When you hear five short tone
bursts, press INTERCOM or select
Answer. The other endpoint then
starts ringing.
Note: If you do not press INTER-
COM after the ring back tones sound within the time limit set by the
installer, the system cancels the call back.
Feb '05
EP100G-L12 / EP100G-I12 User
Comdial
45
Advertisement
Table of Contents
