Installing the DX-80
2.13 Adding a Music Source
You can connect two sources of music to the CPM for use with the Music On Hold and Background
Music features.
A third option is to use an internal musical tune or tone can be used for callers on hold. If you use this
option is used, the MC1 connector is not used.
2.13.1 SELECTING INTERNAL MUSIC TUNE FOR MUSIC CHANNEL MC1
1. Remove the KSU cover (four screws at each corner) of KSU1.
2. Connect a static discharge wrist strap to a suitable earth ground. Be sure that the strap is touch-
ing bare skin.
Circuit boards are susceptible to damage caused by electrostatic
discharge. You must keep this in mind as you handle the circuit
boards. Refer to Comdial publication IMI01-005, Handling of Electrostatically
3. Locate the CPM and "MUSIC" option strap.
4. Move the "MUSIC" option strap (JP30) from the "EXT" (factory position) to the "INT" posi-
tion.
60
CPM
MC1 & MC2 external music
source Connectors
WARNING
Sensitive Components, for details.
Comdial
October, '03