Clearing One Programmable Button Or Speed Dial Location; Clearing All Programmable Buttons Or Speed Dial Locations; Protecting Programmable Buttons From Being Reprogrammed Orcleared - Comdial HoTelephone 3910S User Manual

Programming (continued)
Clearing One Programmable Button or Speed Dial
Location
1. Lift handset.
2.
Press
STORE.
3. Press programmable button or speed dial location (O-9) to
be cleared.
4.
Press
STORE
again.
Clearing
All
Programmable Buttons or Speed Dial
Locations
1. Lift handset.
2.
Press
STORE.
3.
Dial% 0000.
4. Hang up handset.
5. Lift handset to continue.
Protecting Programmable Buttons from Being
Reprogrammed or Cleared
1. Lift handset. Press
STORE.
2.
Dial +I+ 263 5.
3.
Press
STORE
again. Success tone will sound to indicate
successful programming.
To remove this protection,
1. Lift handset.
2.
Press
STORE.
3.
Dial # 2635.
4.
Press
STORE
again. Success tone will sound to indicate
successful programming.
NOTE: Programmed buttom or speed dial locations can only be
cleared if they have not been protected or ifprotection has been
removed.
Cont hued on next page..
13