Paper Size And Type - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

Paper size and type

The following table describes the paper selection process based on whether you specify
the paper type (plain, letterhead, etc.), paper size, and/or paper source for the print job
(using the print driver). The fourth column shows which paper size and type are used,
based on fully or partially specified paper selection parameters.
Paper type Paper size
Not specified Not specified
Not specified Not specified
Not specified Not specified
Not specified Specified
Not specified Specified
Specified
Not specified
Specified Not specified
Specified
Not specified
Specified Not specified
Specified Specified
Specified Specified
Specified Specified
Note
Specifying a paper source (a specific tray) does not guarantee that paper will be
fed from that tray if the type and size can be satisfied from another source. The
exception to this is a manual feed request, which always uses the MBF unless
you override this selection.
Advanced Features and Troubleshooting Manual
Paper source Size/type used
Not specified Default size; default type
Specified Default size;
(not manual feed) Type configured in specified tray
Specified Manual feed request; default size
(manual feed)
Not specified Default type; specified size;
Specified Specified size;
(not manual feed) Type configured in specified tray
Specified
Manual feed request; specified size
(manual feed)
Not specified Specified type; default size
Specified
Specified type; default size
(not manual feed)
Specified Manual feed request;
(manual feed) specified type; default size;
Not specified Specified type; specified size
Specified Specified type; specified size
(not manual feed)
Specified Manual feed request;
(manual feed) specified type; specified size
Advanced Features
43