Edge-To-Edge; Collating Copies - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

7. In the Custom Paper Size dialog, set the attributes for Width and Length in either
Inches or Millimeters.
8. See page 33 for setting the printer control panel.

Edge-to-edge

This feature prints text and images to the physical edge of the page. If not selected, the
printer defaults to predetermined printable areas for each paper size. When printing
edge-to-edge, there may be some loss of data at the edge due to mechanical and physical
restraints.

Collating copies

When you print multiple copies of a print job, you can have it collated at the printer. Each
copy (pages 1, 2, and 3, etc.) is printed before the next copy. Otherwise, the printer prints
all copies of page 1, then all copies of page 2, etc.
If you do not have the optional hard drive and the print job runs out of printer memory,
then the collated copies will be broken into chunks as large as memory allows. All collated
copies will still be printed, but you will have to put the chunks in order by hand.
Note
Many applications have a collate option in their Print dialog box. Since collation
done at the printer is faster than collation performed by an application, only
select collation in the printer driver (not in the application) for faster printing of
a collated job.
For Windows 95/98/Me (PS/PCL5e) operating systems:
1. In your application, select File and then Print.
2. Select the Xerox Phaser 5400 laser printer driver.
3. Open the Properties dialog box.
4. Select the Paper/Output tab.
5. Under Output Options, select Collated from the drop-down list.
For Windows 2000 and Windows NT (PS/PCL5e) operating systems:
1. In your application, select File and then Print.
2.
Select the Xerox Phaser 5400 laser printer driver.
3. Open the Properties dialog box.
4. Select the Advanced tab.
Under Paper/Output, select Copy Count.
5.
Set the number of copies and check the Collate Copies box.
6.
For Windows NT (PCL6) operating system:
1. In your application, select File and then Print.
Advanced Features and Troubleshooting Manual
Advanced Features
35