Xerox PHASER 5400 Advanced Features And Troubleshooting Manual page 50

Advanced Features
For Windows 95/98/Me (PS/PCL5e) operating systems:
1. In your application, select File and then Print.
2. Select the Xerox Phaser 5400 laser printer driver.
3. Open the Properties dialog box.
4. Select the Paper/Output tab.
5. Click on the Select Paper button.
6. Under Paper Size, select one of the Custom settings from the drop-down list.
7. Select the Customize button.
8. In the Custom Sizes dialog, you can designate three custom sizes (PostScript only) by
setting the attributes for Width and Length in either Inches or Millimeters.
9. See page 33 for setting the printer control panel.
For Windows 2000 and Windows NT (PS) operating systems:
Note
The PCL mini driver does not support custom size paper.
1. In your application, select File and then Print.
2. Select the Xerox Phaser 5400 laser printer driver.
3. Open the Properties dialog box.
4. Select the Advanced tab.
5. Under Paper/Output, select Paper Size.
6. Select PostScript Custom Page Size under Paper Size.
7. In the Custom Page Size Definition dialog:
set the dimensions for Width and Height in Inches, Millimeters, or Points,


select the Paper Feed Direction from the drop-down list, and/or


Note
Once the custom page size is used, you can select the Edit Custom Page Size
button to make changes.
8. See page 33 for setting the printer control panel.
For Windows 95/98/Me, NT, and 2000 (PCL6) operating systems:
1. In your application, select File and then Print.
2. Select the Xerox Phaser 5400 laser printer driver
3. Open the Properties dialog box.
4. Select the Paper/Output tab.
5. Click on the Select Paper button.
6. Under Paper Size, select Custom Paper Size from the drop-down list.
34 Xerox Phaser 5400 Laser Printer