Xerox PHASER 5400 Advanced Features And Troubleshooting Manual page 34

Control Panel Menus
System Menu Items (cont'd.)
Output Timeout Specifies whether the printer waits after a bin is filled or directs output to an
alternate bin.
Values:
Output Dest Sets the default paper output destination for PCL and PostScript jobs.
Values:
Print PS Errors Specifies whether to print an error page whenever a PostScript error occurs
(even if the PostScript job has an error handler that may create a separate
page).
Values:
Power Saver Specifies the number of minutes of inactivity before the printer enters a
low-power state.
Values: (in minutes)
Defaults Specifies the type of factory defaults to use when a printer reset is
performed.
Values:
Notes: For these changes to take place, you must either power the machine
Off
Job Menus
When set to
MBF Size is set to
Custom Y
When set to
default MBF Size is set to
Custom Y
The default Form Length value in the PCL Menu is adjusted to match the
Paper Size.
Low Toner Specifies whether to continue printing when the toner in the Laser Print
Cartridge is low.
Values:
Draft Adjust Controls the amount of toner saved for draft printing.
Values:
18
(printer waits after a bin is filled)
Off
(default - printer directs output to an alternate bin)
On
(default)
Standard Bin
(only shown if optional stacker bin is installed)
Stacker Bin
(default)
Off
On
(never enter Power Saver mode)
Off
15
30
(default)
60
90
120
180
Inches
Millimeters
and then power it back
.
, the default Paper Size value is
Inches
; the default
Letter
to 11 inches.
Millimeters
A4
to 279 mm.
(default)
Continue
Stop
(67 percent) (default)
Light
(25 percent)
Dark
, or restart the printer from the
On
Letter
to 8.5 inches and
Custom X
, the default Paper Size value is set to
; the default
Custom X
Xerox Phaser 5400 Laser Printer
Print or
; the default
; the
A4
to 216 mm and