Creating Proof Jobs Without The Driver; Deleting Secure Or Proof Jobs - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

Hard Disk Drive and Memory (DRAM and Flash ROM)

Creating proof jobs without the driver

If the driver does not have a proof job feature, you can create a proof printing job in both
PCL and PostScript by preceding the job with the following PJL commands:
@PJL XPROOFJOB
@PJL XJOBPASSWORD = number
These commands must be immediately followed by a standard PJL "JOB" command that
includes the "jobname".
The job name can be up to 16 alphanumeric characters in the range ASCII 30 through
ASCII 255, <SP> and <HT>. The password must contain four numeric characters (0-7). If
there isn't a job name or there is a syntax error in the job name, the printer assigns a default
job name. The job name is displayed on the control panel Password menu when you enter
its associated password. If there isn't a password or the password contains syntax errors,
the entire job is printed immediately and is not stored as a proof job.
The following example creates a PCL proof job with the name "Sample" associated with
password 7777 requesting five collated sets in addition to the proof copy.
<ESC>%-12345X@PJL XPROOFJOB
@PJL XJOBPASSWORD = 7777
@PJL JOB NAME = "Sample"
@PJL ENTER LANGUAGE = PCL
@PJL SET QTY = 5
...PCL file...
<ESC>%-012345X@PJL EOJ
<ESC>%-012345X.
The printer continues processing all data after the @PJL SET QTY = 5 command as part of
the proof job named "Sample." The proof job is stored on the hard disk under the name
"Sample" with a password of "7777" (as defined in the PJL XJOBPASSWORD command).
The @PJL EOJ command signifies the end of the proof job ends. The "EOJ" command
should be followed by a UEL.

Deleting secure or proof jobs

You use the Password Menu to print or delete secure or proof jobs.
1. On the control panel, press the Menu keys (labeled 1 or 5) to scroll to the
Menu.
Press the Item keys (labeled 2 or 6) to scroll to the password prompt.
2.
3. Use the number keys to enter the 4-digit password for the job(s) you want to print
completely.
4. Press the Item keys (labeled 2 or 6) to select either
this password.
5. Press the Value keys (labeled 3 or 7) to select either
6. Press the Enter key (labeled 4).
7. Press the On Line key (labeled 0) to exit the menus.
58
or a particular jobs with
All Jobs
or Delete.
Print
Xerox Phaser 5400 Laser Printer
Password