Changing Paper Size, Type, And Color - Xerox AltaLink B80XX Series User Manual

Paper and Media

Changing Paper Size, Type, and Color

When a paper tray is set to Fully Adjustable mode, you can change paper settings each time that you
load the tray. When you close the tray, the control panel prompts you to set the paper size, type, and
color of paper loaded.
When a paper tray is set to Dedicated mode, the control panel prompts you to load a specific paper size,
type, and color. If you move the guides to load a different paper size, the control panel displays an error
message.
To configure the tray settings for Fully Adjustable or Dedicated mode, refer to
on page 167.
To set the paper size, type, or color when a tray is set to Fully Adjustable:
1. Open the paper tray, then load the required paper.
2. Close the tray.
3. At the control panel, select the correct paper size, type, and color:
To select a new paper size, touch Size.
−
− To select a new paper type, touch Type.
To select a new paper color, touch Color.
−
4. To confirm the settings, touch Confirm.
168 Xerox AltaLink
® ®
User Guide
B80XX Series Multifunction Printer
Configuring Tray Settings