Xerox PHASER 5400 Advanced Features And Troubleshooting Manual page 43

Print Menu Items (cont'd.)
Fault History Prints a copy of the fault history log, which lists the last 100 faults that
occurred in the printer.
One copy is printed regardless of the
System Menu
Note: The Fault History is intended mainly for use by service technicians.
Usage Profile Prints a Usage Profile sheet using the PCL default paper and type. The
number for Print Quantity is ignored.
Display Faults Displays on the control panel screen the last 100 fault conditions logged by
the printer (one-by-one). Log entries 1-100 can be selected. This
complements the Fault History option, which can be used by a service
technician to print a history of the last 100 recorded faults.
Values:
Note: The Display Faults are intended mainly for use by service technicians.
Hex Mode Sets hex dump mode, where the data stream is printed as hexadecimal codes
instead of normal print data.
Values:
Restart Printer Reboots the printer without powering it off and powering it on again. This
bypasses the power on diagnostics.
Values:
Note: You must select
function to take effect.
Advanced Features and Troubleshooting Manual
.
Most Recent Fault
...
(up to 100)
Oldest Fault
(default)
Off
On
Yes
(default)
No
and press the Enter key (labeled 4) for this
Yes
Control Panel Menus
value in the
Print Quantity
27