Table of Contents
Advertisement
III PERIPHERAL BLOCK: SERIAL INTERFACE
Clock-Synchronized Interface
Outline of Clock-Synchronized Interface
In the clock-synchronized transfer mode, 8 bits of data are synchronized to the common clock on both the transmit
and receive sides when the data is transferred. Since the transmit and receive units both have a double-buffer
structure, successive transmit and receive operations are possible. Since the clock line is shared between the
transmit and receive units, the communication mode is half-duplex.
Master and slave modes
Either the clock-synchronized master mode or the clock-synchronized slave mode can be selected using
SMDx[1:0].
Clock-synchronized master mode (SMDx[1:0] = "00")
In this mode, clock-synchronized 8-bit serial transfers, in which the serial interface functions as the master,
can be performed using the internal clock to synchronize the operation of the internal shift registers.
The synchronizing clock is output from the #SCLKx pin, enabling an external (slave side) serial input/output
device to be controlled. The #SRDYx pin is also used to input a signal that indicates whether the external
serial input/output device is ready to transmit or receive (when ready in a low level).
Clock-synchronized slave mode (SMDx[1:0] = "01")
In this mode, clock-synchronized 8-bit serial transfers, in which the serial interface functions as a slave, can
be performed using the synchronizing clock that is supplied by an external (master side) serial input/output
device.
The synchronizing clock is input from the #SCLKx pin for use as the synchronizing clock of the serial
interface. In addition, a #SRDYx signal indicating whether the serial interface is ready to transmit or receive
(when ready in a low level) is output from the #SRDYx pin.
Figure 8.2 shows an example of how the input/output pins are connected in the clock-synchronized mode.
S1C33
SINx
SOUTx
#SCLKx
#SRDYx
(1) Master mode
Clock-synchronized transfer data format
In clock-synchronized transfers, the data format is fixed as shown below.
Data length: 8 bits
Start bit:
None
Stop bit:
None
Parity bit:
None
Serial data is transmitted and received starting with the LSB.
B-III-8-4
External
serial device
Data input
Data output
Clock input
Ready output
Figure 8.2 Example of Connection in Clock-Synchronized Mode
#SCLKx
LSB
Data
D0 D1 D2 D3 D4 D5 D6 D7
Figure 8.3 Clock-Synchronized Transfer Data Format
S1C33
SINx
SOUTx
#SCLKx
#SRDYx
(2) Slave mode
MSB
EPSON
External
serial device
Data input
Data output
Clock output
Ready input
S1C33L03 FUNCTION PART
Advertisement
Table of Contents
