Vodavi Starplus Triad-S Product Description Manual page 156

Call Coverage
2. The Coverage station then presses their flashing COVERAGE flexible
Conditions
button,
-or-
Presses the ON/OFF button,
-or-
Lifts the handset if PLA is enabled.
The flash rate is the same as the incoming CO line ringing rate. The
call is answered and ceases to ring at any other stations that may
have the same coverage appearance. The following message is
displayed after the call is answered:
CA LL TO STAT ION XXX
FR OM S TA Y Y Y
By default, no call coverage buttons are assigned.
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need not be
physically installed, only the SLT card must be installed.
Direct CO calls have ring and LCD priority over call coverage calls. The
call coverage station must have a direct CO appearance or Loop
button to pick up an external call. If the call coverage station is in
DND, no audible ringing is heard, however visual and LCD
information is presented.
This feature can be programmed on any key station or DSS Console
with an available flexible button. If the DSS with a call coverage
button assigned is unplugged or moved, the station associated with
that DSS stops ringing until the DSS is plugged in again.
Camp-On or Override drops any internal callers to which a station is
talking.
Only one button type (646 or 647) per covered station can be
assigned on a keyset.
H H :MM: SS
5-25