Vodavi Starplus Triad-S Product Description Manual page 203

5-72
2. Once the system connects to the station, the user's mailbox, the
3. When the user finishes recording, press the pre-programmed VM
Conditions
flexible button LED lights solid green and the LCD displays:
MMM D D Y Y
RECORD button. The LED extinguishes and the normal LCD call
information displays.
If the user hangs up without terminating the record function, the
system performs the exit procedure as described in step 3 above.
If the user presses the TRANS, CAMP-ON, MSG, or FWD buttons
during recording, pressing the button is ignored.
During the recording setup, pressing the CONF button is ignored.
If a VM port is not available when the station user wants to record,
the user receives the following display (lasts six seconds):
R ECOR D IN G U N AV AILA BL E
MMM D D Y Y
(The user may retry after the display extinguishes.)
In the recording mode, pressing the CONF button lets the user add
members to the recording (conference). Normal conference
operation/conditions apply.
If the FLASH or HOLD button is pressed during the recording, the
recording is terminated.
If a station user presses the record button while in a two-party
conference, it is recorded. If the button is pressed a second time, the
conference ends and the call is returned to a two-way conversation.
Only one active recording per station is allowed.
If a conference is being recorded and the conference master exits, the
recording stays active. The recording stops if the initiator re-enters
the conference and ends it, removes the record function, or the
conference ends on its own.
R E CO RD IN G
0 0: 00 am
0 0: 00 am
One-Touch Recording