Vodavi Starplus Triad-S Product Description Manual page 262

Directory Dialing
Viewing the Directory List
1. Dial the Directory List dial code [680] on the dial pad,
2. Press a button on the key pad, once, twice or three times, that
3. Dial [
4. When the desired name displays on the LCD, press the SPEED button
Conditions:
May be used to transfer a call from one station to another.
-or-
Press the pre-programmed* flex button programmed as a directory
dialing button.
represents the letter of the alphabet to begin viewing the list of
names (i.e., when 2 is first pressed, it produces names beginning with
A. When 2 is pressed a second time, it produces names beginning
with B. Pressing 2 a third time produces the names beginning with C).
The alphabet is represented on the key pad as shown in chapter 5,
Figure 5-3: Key Pad - Dial By
.
Directory Dialing
Names beginning with the letter chosen display on the LCD display.
If there are nonames in the Directory List beginning withthe desired
letter, aname with the nexthigherletter displays on the LCD display.
] to scroll up (next entry) through the list,
✳
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the alphabet.
to automatically dial the destination station or outside phone
number (via speed dial).
If the desired party is an intercom station, that station is signaled
according to their intercom selector switch (SLT stations tone ring).
If the desired party is associated to a speed dial bin, the system
selects a CO line and dials the number programmed into the speed
dial bin. Call progress tones are then heard.
Name. Also refer to Figure 5-4: Key Pad -
7-11