Vodavi Starplus Triad-S Product Description Manual page 188

Intercom Buttons
3. The called station then presses the flashing intercom button to
Conditions
answer the incoming intercom call. Once the call is answered, the
following message displays on the called station LCD:
CA LL FR OM STA XXX
MMM D D Y Y
Sta XXX can be a programmed station name.
By default, no intercom buttons are assigned to key stations.
If calls are ringing on intercom buttons and a Handsfree call is
received, the Handsfree call is allowed and the calls ringing continue
with muted ringing.
Multiple intercom path buttons can be assigned to a single station,
however up to five internal parties can be placed on hold per station.
Music-On-Hold is provided to the intercom caller on hold.
Once an intercom button is set up on the keyset, callers dialing that
station always receive ringback tone as long as an available intercom
button is idle. If all intercom buttons are in use, the station may use
the Camp-On or Executive Override features to reach the station.
Internal callers are dropped after the camp-on is answered.
This feature can be programmed on any key station or DSS Console
with an available flexible button. If there is an available intercom
button, the following actions cannot be performed: Executive
Override, ACD Supervisor Barge-In, OHVO, Camp-On or Override.
A call ringing to a station on an intercom button rings muted or
reminder ringing, depending on the stations tone ringing cadence.
Up to five internal parties can be placed on hold. No recall timers
apply to Intercom buttons. Internal callers can be placed and
removed from hold when they appear on an Intercom button.
To utilize the capability of intercom buttons, busy forward cannot be
active at the station.
A call ringing to a station on an intercom button and the DND button
is pressed, returns DND tone to the caller and the call is dropped.
H H : MM am
5-57