Vodavi Starplus Triad-S Product Description Manual page 137

5-6
Flexible Buttons provide access to idle outside lines, DSS/BLF for
internal stations, access speed dial numbers and activate features. These
buttons can be programmed by the individual station user. The default
flex feature buttons are described as follows:
Outside Calls are announced by a tone signal repeated every
3.2 seconds. The corresponding outside line indicator flashes slowly.
Intercom Calls can be tone ringing or voice announce. If voice
announced, the receiving station receives three tone bursts prior to the
announcement. If a tone ringing call, the receiving station hears a tone
ring every 2.4 seconds.
CALL BACK button lets you initiate a call back request to another busy
station. As soon as that station becomes idle, the station that left the
call back request is automatically signaled. A flex button must be
assigned to use this feature.
PICK-UP button lets you pick up a tone ringing intercom call,
transferred, incoming, or recalling outside call to a specific
unattended station, by group or directed call pick-up.
DND (DO NOT DISTURB) button lets the user place their telephone
into Do Not Disturb mode to eliminate incoming outside line ringing,
intercom calls, transfers and paging announcements. The station in
DND can use the telephone to make normal outgoing calls. On
Attendant stations, this button becomes the system Night Mode
button. A flex button must be assigned to use this feature.
LINE QUEUE button lets you queue to an outside line when all lines in
a group are busy. Your station is placed in queue, awaiting a line in
the same group to become available.
Introduction