Re-Mark Menu - Nortel Alteon OS 40M2420 Command Reference Manual

/cfg/port <port alias or number> aclqos/
re-mark <re-mark number>

Re-Mark Menu

[Re-mark Menu]
You can choose to re-mark IP header data for the selected ACL Group on the port. You can
configure different re-mark values, based on whether packets fall within the ACL Metering
profile, or out of the ACL Metering profile.
Table 6-29 ACL Re-Mark Options (/cfg/port/aclqos/re-mark)
Command Syntax and Usage
inprof
Displays the Re-Mark In-Profile Menu. To view menu options, see
outprof
Displays the Re-Mark Out-of-Profile Menu. To view menu options, see
assign acl|blk|grp <1-4096>
Assign an ACL, ACL Block, or ACL Group for DSCP remarking on this port.
unassign acl|blk|grp <1-4096>
Remove an ACL, ACL Block, or ACL Group from DSCP remarking on this port.
reset
Reset ACL Re-Mark parameters to their default values.
cur
Displays current Re-Mark parameters.
40M2420, April 2007
inprof - In Profile Menu
outprof - Out Profile Menu
assign - Assign re-mark action to ACL item
unassign - Unassign re-mark action from ACL item
reset - Reset re-mark settings
cur - Display current settings
Alteon OS Command Reference
page 214.
page 215.
Chapter 6: The Configuration Menu 213